Stainless steel water tank:

Stainless steel water tank basically comes with or without partition based on the client requirement

Stages in the Stainless steel water tank installation

Quotation

The clients (plumbing contractors, main contractors, building owners) shall call Waves Fluid Engineering Pte Ltd for a site survey and our engineer shall perform the site visit to assess the site conditions such as access, elevation, size(s) of the required stainless steel water tank(s). Upon site inspection, our office shall send the most competitive quote for the erection of stainless steel water tank based on the site survey

Requirements

The client / main contractor shall erect the plinth based on the advice / requirement of Waves Fluid Engineering Pte Ltd to facilitate the erection of stainless steel water tank(s). Shop drawings for the installation shall be provided by Waves Fluid Engineering Pte Ltd prior to erection of the stainless steel water tank(s) before commencement of any physical works for the submission to PUB, Singapore by QP

Onsite installation of stainlesstank(s)

Waves Fluid Engineering Pte Ltd shall arrange for the delivery of the stainless steel water tank(s) to the client premises and our competent team along with the proper supervision shall erect the stainless steel water tank(s) as per the approved shop / installation drawing(s)

Handing over

Upon completion of the installation of stainless steel water tank(s) Waves Fluid Engineering Pte Ltd shall arrange with the project team for the following

• Water leak test
• Verification of incoming / outgoing pipe sizes and positions with the client representative

Product features:

All the stainless steel watertank panels and parts supplied by Waves Fluid Engineering Pte Ltd are in compliance with the design requirement of the QP

The involved parts in the stainless steel water tanks are as follows

• 1) I-beam and / or C-channels for thestainless steel watertank skid base
• 2) Stainless steel watertank base panel (SS 316)
• 3) Stainless steel watertank gasket / foam
• 4) Stainless steel bolts and nuts along with washer (SS 316)
• 5) Stainless steel tie-rods and washer(SS 316)
• 6) Stainless steel watertank internal supports(SS 316)
• 7) Stainlesssteel watertank internal ladder (SS 316)
• 8) Stainlesssteel watertank side / wall panel
• 9) Stainlesssteel watertank external ladder (SS 316)
• 10) Air vent (uPVC)
• 11) Stainlesssteel watertank roof panel
• 12) Stainlesssteel watertank manhole panel
• 13) Acrylic clear tube water level indicator
• 14) Stainless steel bracket for manhole panel in the roof
• 15) Baseplate with screw to secure the stainless steel bracket with the water tank
• 16) Contour nuts to tighten the baseplate with the stainless steel bracket
• 17) Incoming / outgoing / drain flanges with required bolts and nuts
• 18) Top guard rail (based on client requirement)

Warranty given by Waves Fluid Engineering Pte Ltd for the tank installation works

Waves Fluid Engineering Pte Ltd assures our clients that all the tank parts and panels are in compliance with BS EN 10088 Part 2 : 2014and comes with TWO years warranty for the stainless steel water tank(s) parts installed by Waves Fluid Engineering Pte Ltd in our client premises against any manufacturing defect or workmanship failures

Need a quote from Waves Fluid Engineering Pte Ltd?

Please contact us at +6591680720 / +6598233464 or email us at sales@wavesfluid.com.sg for further details and discussions.